Trashed Tool Treasure – Melting My Tools – Copper & Aluminium Extraction – ASMR Metal Melting



So after years of using some tools they finally gave up and you know me ill melt them down into something. I also melted down the wife’s hair straightener and a small fan. Don’t forget to hit the bell 🔔 for all notifications as I’m working on a giveaway for 4 lucky winners very soon , they can be anywhere in the world I just need to work out what they will win and what the giveaway would involve. I won’t be putting giveaway in the title as that would attract a lot of people that don’t normally view my channel so you will not know which vid it is so be sure to watch them all👌🏻. And like I normally say if you like the rings used in this video be sure to check out the description where you can get 20% off the already discounted rings using my code and if you want to try your hand at melting yourself you can buy the burner on its own or the whole furnace set up and I can organise a 5% link for you of the total furnace price just email me on the link in the description😁👍🏻.

************************************************
RING WEB SITE
https://gthic.com/?aff=27
Want 20% off then Use the code Dion20

This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!

*****************************************************************************
bigstackddddd@mail.com is my email if you want a 5% off discount link for a furnace or if you want just the Burner and make your own furnace the 5% link will work for that aswell.

*********************************************************************************

I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online name.

D Heighway
PO Box 7192
Eaton, WA 6232
Australia

*******************DISCLAIMER************************************ DO NOT TRY THIS AT HOME
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
*******************************************************************************************************
My other 250+ videos
https://www.youtube.com/user/bigstackD/videos
********************************************************************
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
https://www.youtube.com/watch?v=fYpWL-t3K8s&t=1s

Follow me on Facebook
https://www.facebook.com/Bigstackd-Casting-293591814685373/

Follow me on Instagram
https://www.instagram.com/bigstackd_casting/?hl=en

Element Cube Casting Video
https://youtu.be/tsF77TQvHi0

********************************************************************
Forge supplied by my friends in Devil-Forge. They sell a large selection of forges, ovens, burners and even the most incredible 5-burner ironworking furnace on the Internet.

DEVIL FORCE MAIN PAGE
http://devil-forge.com
EBay Store
https://www.ebay.com.au/itm/FB2Mb-10KG-GAS-METAL-MELTING-FURNACE-Propane-Forge-Copper-Brass-Bronze-Silver/253796844325?_trksid=p2485497.m4902.l9144

************************************************************************************************
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it??????.

****************************************************
STEEL FOR MY FRIEND
I keep all my steel and cast iron pieces and I give them to my friend and once he gets about a tonne from me and his own collecting he takes that to the scrapyard and sells it then he buys some beer and comes over to my house and we make a night of it.
No My friend doesn’t have a YouTube channel he just scraps metal in his spare time.
****************************************************

#bigstackDCasting
#MeltingMetal
#BigstackD
#ASMRMetal Melting
#TrashToTreasure

source

21 Replies to “Trashed Tool Treasure – Melting My Tools – Copper & Aluminium Extraction – ASMR Metal Melting”

  1. Happy Friday everyone I hope you’ve all been well and had a uneventful week so sit back turn your brain off in tune out for the best 10 minutes of the week😁. Today isn’t a very big melt or addition to the shelves but that’s okay every little bit helps and I certainly wasn’t going to throw out these tools without stripping them. Now like I always say if you want to try this satisfying hobby at home simply hit me up on the email in description for a 5% link off the total furnace or burner price and if you’re interested in a look at some cool rings check out the link in the description where you will save 20% off there already discounted prices if you use my code. There is some awesome rings I guarantee you won’t be disappointed in their high quality😀.

  2. Hey BIGSTACKD, have you tried getting as many micro processors as possible and made a big gold bar out of them yet?

  3. Ken Reddick says:

    I like his style…. nothing goes to waste..👍

  4. Your pets are too cute.

  5. It’s me says:

    0:00 ohhhhhh so sweet

  6. I used the drill to destroy the drill

  7. Is it a good idea or a bad idea to add a strong piece of an aluminum extrusion when casting brittle aluminum?

  8. James Weber says:

    Grinder grinding a Grinder: Your Weak

    Grinder being Ground: I'M YOU

  9. You have similar energy to How To Basic.

  10. WHAT THERE IS LIKE 40 LITTLE INGOTS

  11. You did a good job on the second one

  12. Adeo Breaux says:

    You are the only person in the world who uses a beer coozy unironically.

  13. Deema says:

    Question
    What is the sludge with hot steel? I remember a video in the channel where there was a green train but i had no clue

  14. Do you sell your end products?

  15. SURAJ JAIN says:

    Sir I m your big fan
    I m from india
    I need your help
    I m also want metal casting sir plz tell me where can I get this type all instrument plz guide me

  16. Syed Ilyas says:

    People should be careful parking their cars near u, u might give them back in stacks of metal

  17. MattCatt says:

    Baby Bullion!!

  18. Gdybyś wpadł na pomysł aby przetopić łańcuch z szyi psa… nie zapomnij ten łańcuch najpierw z psa ściągnąć😜👍