Brass Bin Bullion – Zinc Skulls – Trash To Treasure – ASMR Metal Melting – Dumpster Find – BigStackD



Hello again all you awesome people how are you all this week? Just recently I got a call from a friend on the local site that i get my scrap from and he told me there was some pieces left for me on top of one of the scrap bins so i cruised down to have a look. I ended up getting an inline multi valve setup for compressed air with a bonus Zinc air moisture trap so obviously i melt it all down. I do it in 2 melts . I made my usual perfect bar and 2 of the weirdest but best skulls ive made . So check it out and let me know what you think about the finish on the Zinc Skulls. Take care be safe and see you all next week.
I now have nearly over 300 videos so when you get a chance be sure to check out what you’ve missed and if you Feel like supporting the channel Simply donate some of your time just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways👊🏻😄. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻and like I always say if you like the rings shown and used in this video be sure to check out the description where you can get 20% off the already discounted rings using my code and if you want to try your hand at melting yourself you can buy the burner on its own or the whole furnace set up and I can organize a 5% link for you off the total furnace price just email me on bigstackddddd@mail.com 😁👍🏻.

BigStackD DUST MELT
https://www.youtube.com/watch?v=IJg_YQYXm8Q
**********
Follow me on Instagram for more behind the scenes pics.
https://www.instagram.com/bigstackd_casting/?hl=en
**********
TONG AND LIFTER BUILD VIDEO
https://www.youtube.com/watch?v=nyp0GiE5FTQ
***************
RING WEB SITE
https://gthic.com/?aff=27
Want 20% off then Use the code Dion
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online youtube name or email address .

D Heighway
PO Box 7192
Eaton, WA 6232
Australia
***
********DISCLAIMER****DO NOT TRY THIS AT HOME*****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
*********************************************************************************************
My other 290+ videos
https://www.youtube.com/user/bigstackD/videos
********************************************************************
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
https://www.youtube.com/watch?v=fYpWL-t3K8s&t=1s

Follow me on Facebook
https://www.facebook.com/Bigstackd-Casting-293591814685373/

My Personal Stamp was Made at etsy.com
************************************************
Forge supplied by my friends in Devil-Forge. They sell a large selection of forges, ovens, burners and even the most incredible 5-burner ironworking furnace on the Internet.

DEVIL FORGE MAIN PAGE
http://devil-forge.com
EBay Store
https://www.ebay.com.au/itm/FB2Mb-10KG-GAS-METAL-MELTING-FURNACE-Propane-Forge-Copper-Brass-Bronze-Silver/253796844325?_trksid=p2485497.m4902.l9144

****************************************************
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it??????.

*****

#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
Brass Bin Bullion – Zinc Skulls – Trash To Treasure – ASMR Metal Melting – Dumpster Find – BigStackD

source

43 Replies to “Brass Bin Bullion – Zinc Skulls – Trash To Treasure – ASMR Metal Melting – Dumpster Find – BigStackD”

  1. 800K subs I surpassed just a few hours ago thanks to all you awesome people for helping me get there, I appreciate everyone of you😁👊🏻
    A great fine today thanks to my mate, I had the luxury of adding an awesome mirrored brass bar and some pretty funky looking skulls in today’s melt. Let me know what you think of the skulls as I personally think they came out great and I’m not really sure why they look the way they do but it’s a good chance because I was tapping on the mold as the metal was setting. So Take a break check out today’s video and as always have an unbelievably awesome weekend my friends.

  2. Ahmed Ahmed says:

    بحب كل فيدوهاتك من مصر 🇪🇬🇪🇬🇪🇬

  3. Neha Singhal says:

    Finally two minutes 17 wiev

  4. Gwen Yu Soon says:

    Awww Bullion’s nibbling on the gate

  5. T Mn says:

    🐶🐶puppers are so adorable

  6. AYY one minute ago. i love staying up all night. I haven't seen how the skulls came out yet but i think like usual they will look great. I hope that one day you'll make a crucible mold and, have each metal you turn to ingots and such have their own crucible to match.

  7. I've been refreshing between rounds of SnD on COD for an hour waiting for an excuse to get done so I can watch this

  8. BADBOY ANSH says:

    ᴘʟᴇᴀsᴇ ʟᴏᴠᴇ ᴍʏ ᴄᴏᴍᴍᴇɴᴛ

  9. Hi first 100 🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🍺🍺🍺🍺🍺🍺🍺🍺🍻🍻🍻🍻🍻

  10. Heck yeah good to sit down on a Friday night with a beer and watch bigstackd btw could you do another copper or aluminium melt and like skulls tho

  11. 800k gonna crack a cold one for celebration with ya mate. Cheers 🍻 you're on your way to million

  12. It’s 1am in the morning and I am here, the wonders of YouTube

  13. Хорошие запчасти были среди всего:)

  14. Ingot is like dang Bullions I know our family has medal running through our veins but your not suppose to eat the fence little bro 🤪🤪🥰🥰

  15. وين هل غيبه؟!

  16. happy friday D 🙂 hope it finds you and the fam well, looking forward to another epic friday melt n drinks with da boyz <3

  17. Help it's 4 AM over here. I need sleep

  18. I love all your videos 😊
    It really makes me relax😌

  19. Có ai Việt Nam xem không nhỉ 😘

  20. 800.000 sub, the million is near, cheers 🍻🍻

  21. WHat measurements is the ingot mould you used for the first brass bar

  22. Yash Devi says:

    Congratulations 👏 for 800k

  23. A well deserved celebration. Great work!

  24. Skull are looking really cool 👍
    Love it ❤️

  25. Yea nah tho says:

    Really like the melting video and the quality and editing keeps getting better keep up the great work

  26. Grant Hagen says:

    Skulls for the skull throne!

  27. Waking up early in the morning for some good ‘old fashioned Bigstackd

  28. VC シ MEGMA says:

    ❤🔥👍😍

  29. Bu2Spike says:

    Nicely done mate, I love them

  30. 🌷🌷🌷🌷🌷🌷😊😙

  31. Big love and support from Texas.

  32. i absolutely love the colorful socks

  33. I do wonder what the approx value of the collection is currently. Please keep doing tear downs, they are the best videos.

  34. i want you to try to melt steel and see how its become