9 Metal Melt Down – Nordic Gold Tin Zinc Copper Bronze Brass Lead – ASMR Metal Melting – BigStackD



Hello to all you awesome people out there how is everyone doing today? Today’s video is quite long as there is 9 melts. Now I get lots of comments from people asking about different weights of different metals so today I melt down 4 metals and 5 alloys and make 9 identical size blocks and show the weight comparison of each. So sit back relax and enjoy today’s video and hopefully I’ll see all you people are getting next Friday for my usual weekly melt👌🏻😁. Take care and have a great week my friends.
Merch is finally available but I’m not going to push it like some channels , it’s there to find on your own free will. I will mention it here and there but not throw it in your face in every video like a lot of channels do, but if you don’t want the Merch but still want to support the channel Simply donate some of your time to help support the channel just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways👊🏻😄. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻and like I always say if you like the rings shown and used in this video be sure to check out the description where you can get 20% off the already discounted rings using my code and if you want to try your hand at melting yourself you can buy the burner on its own or the whole furnace set up and I can organize a 5% link for you off the total furnace price just email me on bigstackddddd@mail.com 😁👍🏻.
Contact me bigstackddddd@mail.com
BigStackD DUST MELT
https://www.youtube.com/watch?v=IJg_YQYXm8Q
**********
Follow me on Instagram for more behind the scenes pics.
https://www.instagram.com/bigstackd_casting/?hl=en
**********
TONG AND LIFTER BUILD VIDEO
https://www.youtube.com/watch?v=nyp0GiE5FTQ
***************
RING WEB SITE
https://gthic.com/?aff=27
Want 20% off then Use the code Dion
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online YouTube name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
***
********DISCLAIMER****DO NOT TRY THIS AT HOME*****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
*********************************************************************************************
My other 295+ videos
https://www.youtube.com/user/bigstackD/videos
********************************************************************
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
https://www.youtube.com/watch?v=fYpWL-t3K8s&t=1s
***********************************************************************
My Personal Stamp was Made at etsy.com
***************************************************
Follow me on Facebook
https://www.facebook.com/Bigstackd-Casting-293591814685373/
************************************************
Forge supplied by my friends in Devil-Forge.

DEVIL FORGE MAIN PAGE
http://devil-forge.com
EBay Store
https://www.ebay.com.au/itm/FB2Mb-10KG-GAS-METAL-MELTING-FURNACE-Propane-Forge-Copper-Brass-Bronze-Silver/253796844325?_trksid=p2485497.m4902.l9144

****************************************************
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it??????.

*****

#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure

source

26 Replies to “9 Metal Melt Down – Nordic Gold Tin Zinc Copper Bronze Brass Lead – ASMR Metal Melting – BigStackD”

  1. Hey there everyone how are you all doing? I hope you’ve had a great week and I hope this video can help you forget any stressful situations so just sit back relax turn your brain off and check out today’s multiple metal melts. And if you think your friends might like this channel be sure to let them know as that will be a big help getting me to 1,000,000 subs👌🏻😁.
    I hope everyone has a great weekend and a safe week and see you all next Friday 👋🏻.

  2. H Khan says:

    8:17 what was that?

  3. 26 minutes i see all

  4. varlotto says:

    That 5th beer on the first day of melting was dangerous

  5. This guy is too good at timelapse shots

  6. M G says:

    "But we are not normal over here" 😂😂
    That's why I watch you!

  7. Don't mind me just an Amarican with a messed up sleep schedule

  8. Greetings form Poland 🇵🇱

  9. REV STREAK says:

    Knowing that australia is super dangergous how do you manage to have the dogs outside?

  10. ArtByAdrock says:

    Nice loooooong melt today brotha! Gotta love the zinc fumes 🤣 perfect mix to add to the shelves 👍🏻🍻🍻🍻

  11. BRAMS says:

    Необходимо ещё Палладия намутить, грамм так 2000🤔

  12. itll doo says:

    coat the lead in resin for display

  13. Mihai George says:

    is it just me or his shelves kinda started bending

  14. Wiiiiiow🌷🌷🌷🌷🌷

  15. Every day i wate for your videos

  16. weafon says:

    how drunk where you at the end of the video

  17. Jonny Gunn says:

    Great video! I’m amazed at your pouring skills! That is NOT easy! Love your boys coming out to the garage to check on you! 😂

  18. kenesu says:

    Beer per smelt.

  19. The Breach says:

    A german fan right here to 🙂

  20. Man your wearing me out with all the running to the fridge lol,keep the videos coming champion

  21. TTM 1895 says:

    Fabulous melts. Marathon of Metals. Cheers!

  22. rubikfan1 says:

    14:54 why not use acetylene gas instead. Much hotter flame. It will easely melt steel