Triple Metal Melt – Pewter Sterling Silver Lead – ASMR Metal Melting – BigStackD Casting – Zinc Coin

September 24, 2021 by 29 Comments



Hey guys today i melt a heap of pewter pieces i got from my local Op Shop , These pewter pieces don’t show up to often so when they do i grab them. I also melt some Sterling Silver bits & Lead that a sub sent in to me as well as making a huge Zinc coin. Now sit back and enjoy todays vid and ill see you all next week for the big 1000LB Motor Melt Down. 👌.
Feel like supporting the channel it wont cost you a cent as you can Simply just donate some of your time. By just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways and more treats for the dogs👊🏻😄. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻and like I always say if you like the rings shown and used in this video be sure to check out the description where you can get 20% off the already discounted rings using my code and if you want to try your hand at melting yourself you can buy the burner on its own or the whole furnace set up and I can organize a 5% link for you off the total furnace price just email me on bigstackddddd@mail.com 😁👍🏻.
Contact me bigstackddddd@mail.com
BigStackD DUST MELT
https://www.youtube.com/watch?v=IJg_YQYXm8Q
**********
Follow me on Instagram for more behind the scenes pics.
https://www.instagram.com/bigstackd_casting/?hl=en
**********
TONG AND LIFTER BUILD VIDEO
https://www.youtube.com/watch?v=nyp0GiE5FTQ
***************
AWESOME CUSTOM STEEL STAMPS FROM ALINA
https://www.etsy.com/shop/StampsworkshopCo?ref=seller-platform-mcnav
*******************
RING WEB SITE
https://gthic.com/?aff=27
Want 20% off then Use the code Dion
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online YouTube name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
***
********DISCLAIMER****DO NOT TRY THIS AT HOME*****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
*********************************************************************************************
My other 320+ videos
https://www.youtube.com/user/bigstackD/videos
********************************************************************
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
https://www.youtube.com/watch?v=fYpWL-t3K8s&t=1s
***********************************************************************
Follow me on Facebook
https://www.facebook.com/Bigstackd-Casting-293591814685373/
***********************************************
Forge supplied by my friends at Devil-Forge.
Dont forget to email me for a 5% discount link and a heap of info to get you Started😁
**************************
Now if your chasing a 5% discount on a furnace and a heap of helpful info & links to get you started hit me up on this email bigstackddddd@mail.com

*******************************
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it.

*****

#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
#dumpsterdiving
#scrapyard
Triple Metal Melt – Pewter Sterling Silver Lead – ASMR Metal Melting – BigStackD Casting – Zinc Coin

source

29 Replies to “Triple Metal Melt – Pewter Sterling Silver Lead – ASMR Metal Melting – BigStackD Casting – Zinc Coin”

  1. And we’re back with another melt on another Friday. Pretty straightforward today As I melt down a heap of pewter pieces I found at an op shop over the last year as well as some subscriber sent scrap and other bits and pieces. Quite a few dollars in today’s melt which will add to the stacks value for sure. Definitely don’t forget to hit the 🔔 to be notified on next Friday’s melt as I get that big 1000LB motor melted down. Hopefully I’ll get at least 50LB of copper out of it but we will see. Have yourself an awesome weekend & until next time take care BSafe😁👋🏻

  2. Nikolai508 says:

    First he melts metal and then he melts our hearts.

  3. Frida Åberg says:

    Silversmith here, you are pouring the silver to slow. When casting silver, a centrifuge or vacuum is usually used or if you don’t have those, pour very quickly in one fast motion with the torch still on it. 👍😊

  4. Elijs Dima says:

    Clear-coating the lead bar was a good idea, makes it much more safe to have around the house.

  5. Thermos the beer take my like good sir

  6. Você já se perguntou como vc veio parar aqui de madrugada?!?

  7. SiViX says:

    Damn, I didn''t know you could COOK with this thing too… I've gotta save up for one of these, it just looks like so much fun…

  8. In America, we cook meat with grills
    In Aussie, we cook our meats over a fckin furnace, mate!

  9. Да твоя полочка просто сокровище.👍👍👍👍👍 Даже 4 АНКХА выплавил
    Каким газом пользуешься?

  10. Owen Foxx says:

    Sterling silver sucks to melt a quick refining with acid makes a huge difference

  11. Fury God says:

    Hey buddy be honest are u one of the memebers from secret society

    מתפלל השטן. ??

  12. Sterling is a bear to pour good bars from since the copper wants to crater up on the top. You can heat your graphite molds to red hot and it will flow a million times better and give you the quality bar you're after, but you only get a few bars out of a mold before it's done with

  13. Get the mold red hot…..like higher than melt temp….it’ll pour better. Aerosolised led will kill you in high enough doses over a period of time….

  14. Ba Jabbar says:

    Selangor pewter, selangor is from indon 👏

  15. If it was 666 and you added more to it… how was it still 666? lol

  16. I loved how careful you were.

  17. Emmet Lorenz says:

    Breaking news: melting metals causes cancer
    This guy:😐

  18. ulaş kaya says:

    Good job bro👍👏👏

  19. MrGoesBoom says:

    5:30 and NOW…it's a cooking channel. Also, I'm hungry as hell now

  20. barany pepe says:

    Laughed so hard, when u check your beer's temperature, and u choosed the most cold :'D :'D :'D We Love u bigstackD 😀

  21. Jack6000YT says:

    Funny Silver are fast Smelting. Bad have it Very Very Fast Cold so hard to make silver ingot

  22. Iceman11243 says:

    My girlfriend wants to know if you’re secretly a dragon

  23. Bear Vassar says:

    Cant you add borax as a flux. Either that or a good mold cleaning,add to the material.

  24. Just curious. I've never done anything melting or smelting or whatever it's called, but I have done concrete work that gave me an idea of (possibly) better turn outs. If you dont mind doing a [let's see if this works out] show.. try using a vibration contraption resting on the mold while pouring metal,, it just might help (like in concrete work) to get out air pockets and spread metal better to all corners.. 😇

  25. все обязательно делать плохо?

  26. tosy tube says:

    try doing real gold in the future, it would be a nice collection

  27. Jose Ramos says:

    I just noticed Sack Boy at 3:06