3 Phase Motor Meltdown – Melting Copper – ASMR Metal Melting – Trash To Treasure – BigStackD Casting

January 14, 2022 by 20 Comments



Its been 8 long weeks since my last motor meltdown so today its time for another 1. A quick trip to the scrapyard which is only minutes away and I found the perfect motor to melt. Now as always sit back relax and enjoy todays melting and as always have a great weekend and see you all next Friday๐Ÿ˜.
******
20% OFF RINGS & BRACLETS Simply use the code word DION on this link
https://gthic.com/?aff=27
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
5% Off a furnace ,Burner, Full set up or Forge and a heap of start up info and links email me on bigstackddddd@mail.com
*********
Now Guys if you Feel like supporting the channel it wont cost you a cent as you can Simply just donate some of your time. By just by allowing the ads to play through this will help out a lot and thatโ€™s how I make a bit extra revenue and the good thing is more revenue means more giveaways and more treats for the dogs๐Ÿ‘Š๐Ÿป๐Ÿ˜„. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but donโ€™t ever feel as though you need to watch the ads if you donโ€™t want to simply skip them and move into the video itโ€™s completely up to you and I understand if you donโ€™t have the time to do so๐Ÿ‘Œ๐Ÿป๐Ÿ˜๐Ÿ‘๐Ÿป.
*********
461KG Motor Melt Down 34 minute Video
https://www.youtube.com/watch?v=kRsZaV1emM4
**********
BigStackD DUST MELT
https://www.youtube.com/watch?v=IJg_YQYXm8Q
**********
Follow me on Instagram for more behind the scenes pics.
https://www.instagram.com/bigstackd_casting/?hl=en
**********
LIFTER BUILD VIDEO
https://www.youtube.com/watch?v=nyp0GiE5FTQ
***************
AWESOME CUSTOM STEEL STAMPS FROM ALINA
https://www.etsy.com/shop/StampsworkshopCo?ref=seller-platform-mcnav
*******************
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online YouTube name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
***
********DISCLAIMER****DO NOT TRY THIS AT HOME*****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
**********************************
My other 338+ videos
https://www.youtube.com/user/bigstackD/videos
********
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
https://www.youtube.com/watch?v=fYpWL-t3K8s&t=1s
*****
Follow me on Facebook
https://www.facebook.com/Bigstackd-Casting-293591814685373/
********
Forge supplied by my friends at Devil-Forge.
Dont forget to email me for a 5% discount link and a heap of info to get you Started๐Ÿ˜
*********
FURNACE SETUP 4KG
https://youtu.be/gF86vSsAw1w

FURNACE SETUP 10KG
https://youtu.be/djEnkB8PH-s

TEMPERING CRUCIBLES – Pauls Garage
https://youtu.be/wWAJPlrcQVY

GAS USAGE AND SPEED COMPARISONS ON ALL 4 DEVIL-FORGE FURNACES
https://youtu.be/jwNY9PswHDY

WHAT YOU NEED TO START MELTING METAL including LIFTER AND TONG BUILD
https://youtu.be/nyp0GiE5FTQ

LEARNING TO CAST VIDEOS – Swdweeb
https://youtube.com/playlist?list=PLU1QP34Dv8Y70lJsPZDGnnW2n0A_fhF0w

AWESOME CUSTOM STEEL STAMPS
https://www.etsy.com/shop/StampsworkshopCo?ref=seller-platform-mcnav

CUSTOM COIN MOLDS NEW ZEALAND & AUSTRALIA ONLY
https://www.facebook.com/EccentricKiwiCreative

PETROBOND SAND AUSTRALIA ONLY
https://www.greensand.com.au/epages/greensandfoundry.mobile/en_AU/?ViewAction=View&ObjectID=61835185&PageSize=5&Page=4

COIN MOLDS LAS VEGAS – ArtByAdrock
artbyadrock.com

***********
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it.

*****

#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
#dumpsterdiving
#scrapyard
3 Phase Motor Meltdown – Melting Copper – ASMR Metal Melting – Trash To Treasure – BigStackD Casting

source

20 Replies to “3 Phase Motor Meltdown – Melting Copper – ASMR Metal Melting – Trash To Treasure – BigStackD Casting”

  1. Welcome back you sensational subs how are you all today?. It's been a while since I did a motor so it'll be a pretty simple melt today. A nice mirrored Copper bar and some big Aluminium bricks to add to the stack. Now Sit back relax & enjoy today's video and I hope to see you all next Friday๐Ÿ˜๐Ÿ‘‹๐Ÿป

  2. Shreyas Pai says:

    3:23 thanks for informing.. I was about to say you might be having a time bomb installed at your place by some jealous viewers

  3. william reed says:

    Great video as always. Do you have anything special planned for when you reach 2000 lbs?? You are close. Just under 300 to go. I all be watching. Ingot and Billion are the best. Bill, Connecticut, U S A

  4. Mrpd Dean says:

    About time you did a big big casting like 5 or ten kilos in one hit you appear to have plenty of furnace's maybe a pyramid

  5. Dean Grein says:

    Great video. I love the trips to the dump!!

  6. The Chad says:

    You are the only reminder that I have that its Friday!

  7. MakoRuu says:

    Why does aluminum turn into marshmallow fluff when it melts?

  8. Sarit Alony says:

    The aluminium casing motors are the best. Love those melts.

  9. Arash Zergan says:

    Hello, find an old welding machine and scrap it. It has a lot of copper

  10. Rani Devi says:

    Melt the empty tablet packets

  11. Can't think of a better way to unwind before going to sleep. Always wanted to melt down my own scrap metal but can never find the time to do it

  12. The Chad says:

    You really need to get you a beer sponsor ๐Ÿบ๐Ÿบ๐Ÿบ

  13. What was that backwards talking weirdness at the end there?

  14. SamCM227 says:

    bigstackD videos always makes my Friday's man, thank you BSD! ๐Ÿ‘Œ๐Ÿ‘

    P. S. Stay safe, stay cool don't put yourself at unnecessary risk with the heat etc…

  15. Great camera angles!! I particularly liked the one that looked straight at the grinders cutting blade as you removed the coils from the casing.

  16. Jason Lazore says:

    I can already tell that by the end of 2022 you will have achieved your goal. Keep melting those heavy weight scraps.

  17. SpaceHK says:

    Watching the video with the first cup of coffee at the coffee… the best start for the day. Thanks for it and have a nice Weekend. ๐Ÿต๐Ÿ˜Š๐Ÿ‘

  18. Why does it become so much slag from the aluminium?

  19. Grey Wolf says:

    Glad to get my weekly melt fix. Thank you bigstackD castings